Optics ready plates for Walther PDP Full Size 2.0

This collection contains optic plates for the Walther PDP Full Size 2.0. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the Walther PDP Compact 2.0, Walther PDP F-Series, Walther PDP Steel Frame and Walther PDP Pro, see Optics ready plates for Walther PDP Compact 2.0, Optics ready plates for Walther PDP F-Series, Optics ready plates for Walther PDP Steel Frame and Optics ready plates for Walther PDP Pro.

Footprints for the Walther PDP Full Size 2.0

• Trijicon RMR: plates from 2BME, Eemann Tech and Walther.
• Shield RMSc: plates from 2BME, Eemann Tech and Shield Sights.
• Holosun K-series: plates from 2BME and Eemann Tech.
• Leupold DPP: plates from Walther and 2BME.
• Docter: plates from Eemann Tech, 2BME and Walther.
• C-More RTS: a plate from Eemann Tech.
• Aimpoint Acro: plates from 2BME and Walther.
• Holosun 509T: a plate from Walther.

Material

2BME makes its plates from aluminium. Eemann Tech, Walther and Shield Sights make their plates from steel. An aluminium plate is lighter. A steel plate is heavier and robust.

Red dot without a plate

The Holosun SCS PDP and Vector Optics Frenzy FA 1x16x24 for Walther PDP 2.0 fit the optic cut directly, without a plate.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
• Aimpoint Acro: enclosed red dots such as the Steiner MPS. See Red dots with Aimpoint Acro footprint.
• Holosun 509T: the enclosed Holosun 509T.

For direct-fit red dots, see Direct-fit red dots for Walther PDP 2.0. For all plates of this brand, see Optics ready plates for Walther models.

Frequently asked questions

Can I install an optic plate on my Walther PDP Full Size 2.0 at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my Walther PDP Full Size 2.0?

It depends on the plate you choose. For the Walther PDP Full Size 2.0 we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro and Holosun 509T footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.

Is there a red dot that fits without a plate?

Yes. The Holosun SCS PDP and Vector Optics Frenzy FA 1x16x24 for Walther PDP 2.0 go straight into the optic cut.