Optics ready plates for Phoenix Drake

This collection contains optic plates for the Phoenix Drake. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the Phoenix Fusion, Phoenix Predator and Phoenix Redback Gen2, see Optics ready plates for Phoenix Fusion, Optics ready plates for Phoenix Predator and Optics ready plates for Phoenix Redback Gen2.

Footprints for the Phoenix Drake

• Trijicon RMR: a plate from Phoenix.
• Shield RMSc: a plate from Phoenix.
• Leupold DPP: a plate from Phoenix.
• C-More RTS: a plate from Phoenix.

Material

Phoenix makes its plates from steel.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.

For all plates of this brand, see Optics ready plates for Phoenix models.

Frequently asked questions

Can I install an optic plate on my Phoenix Drake at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my Phoenix Drake?

It depends on the plate you choose. For the Phoenix Drake we have plates for the Trijicon RMR, Shield RMSc, Leupold DPP and C-More RTS footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.