Optics ready plates for CZ P-10C Ported

This collection contains optic plates for the CZ P-10C Ported. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the CZ P-10C Optics Ready, CZ P-10F Optics Ready and CZ P-10S Optics Ready, see Optics ready plates for CZ P-10C Optics Ready, Optics ready plates for CZ P-10F Optics Ready and Optics ready plates for CZ P-10S Optics Ready.

Footprints for the CZ P-10C Ported

• Trijicon RMR: plates from CZ, Evo Arms and Eemann Tech.
• Shield RMSc: plates from Eemann Tech and Evo Arms.
• Holosun K-series: plates from Evo Arms, Eemann Tech and 2BME.
• Leupold DPP: plates from CZ and 2BME.
• Docter: plates from CZ, Evo Arms and Eemann Tech.
• C-More RTS: a plate from CZ.
• Aimpoint Acro: a plate from CZ.
• Holosun 509T: a plate from Holosun.
• Vortex Razor: a plate from CZ.

Plates for several footprints

• CZ: Shield RMSc and Holosun K-series.

The type letters differ between makers. Always read the footprints in the brackets.

Material

CZ, Eemann Tech and Evo Arms make their plates from steel. Holosun and 2BME make their plates from aluminium. An aluminium plate is lighter. A steel plate is heavier and robust.

Red dot without a plate

The Holosun SCS P-10 fits the optic cut directly, without a plate.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed. The recommended torque for the plate screws is 1. If you lose or damage the screws, we have spare screws for these plates.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
• Aimpoint Acro: enclosed red dots such as the Steiner MPS. See Red dots with Aimpoint Acro footprint.
• Holosun 509T: the enclosed Holosun 509T.

For all plates of this brand, see Optics ready plates for CZ models.

Frequently asked questions

Can I install an optic plate on my CZ P-10C Ported at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my CZ P-10C Ported?

It depends on the plate you choose. For the CZ P-10C Ported we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Holosun 509T and Vortex Razor footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.

Is there a red dot that fits without a plate?

Yes. The Holosun SCS P-10 goes straight into the optic cut.