Optic ready plates for KMR L-02 Umbra OR

This collection contains optic plates for the KMR L-02 Umbra OR. The plate goes into the factory optic cut of the slide and takes the red dot on top. Every plate is made for one footprint or a group of footprints, so you choose it by the footprint of your red dot.

Footprints for the KMR L-02 Umbra OR

• Trijicon RMR: a plate from KMR.
• Shield RMSc: a plate from KMR.
• Leupold DPP: a plate from KMR.
• Docter: a plate from KMR.
• C-More RTS: a plate from KMR.
• Aimpoint Acro: a plate from KMR.
• Vortex Razor: a plate from KMR.
• Meopta Meored: a plate from KMR.

Material

KMR makes its plates from steel.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Docter: also called Vortex Venom or Noblex, for example the Vector Optics Frenzy 1x17x24 and Frenzy-X 1x20x28. See Red dots with Docter footprint.
• C-More RTS: the C-More RTS, the Toni System ZR, ZV and ZX and the Vector Optics Frenzy Plus. See Red dots with C-More RTS footprint.
• Aimpoint Acro: enclosed red dots such as the Steiner MPS. See Red dots with Aimpoint Acro footprint.

For all plates of this brand, see Optics ready plates for KMR models.

Frequently asked questions

Can I install an optic plate on my KMR L-02 Umbra OR at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my KMR L-02 Umbra OR?

It depends on the plate you choose. For the KMR L-02 Umbra OR we have plates for the Trijicon RMR, Shield RMSc, Leupold DPP, Docter, C-More RTS, Aimpoint Acro, Vortex Razor and Meopta Meored footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.