Red dot mounts for Tanfoglio Domina

This collection contains red dot mounts for the Tanfoglio Domina. The mount goes into the rear sight dovetail in place of the rear sight. You fit a red dot without milling and without permanent changes, and you can put the rear sight back at any time. Every mount takes one footprint or a group of footprints, so you choose it by the footprint of your red dot. For the Tanfoglio Domina Xtreme, see Red dot mounts for Tanfoglio Domina Xtreme.

Footprints for the Tanfoglio Domina

• Trijicon RMR: a mount from Toni System.

Side and frame mounts

A rear sight mount sits on the slide and moves with it. A side or frame mount is fixed to the frame, so the red dot stays still while the slide cycles. .

Material

Toni System makes its mounts from aluminium.

Installation

Drift the rear sight out of the dovetail with a sight pusher or a punch. Push the mount into the dovetail and fix it. Then screw the red dot onto the mount with a drop of threadlocker on each screw. See Installation tools.

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.

For all mounts of this brand, see Red dot mounts for Tanfoglio models.

Frequently asked questions

Can I put a red dot on my Tanfoglio Domina without an optic cut?

Yes. The mount goes into the rear sight dovetail in place of the rear sight. No milling and no permanent changes.

Can I install the mount at home?

Yes, if you have a sight pusher or a punch.

1. Drift the rear sight out of the dovetail.
2. Push the mount into the dovetail and tighten it.
3. Screw the red dot onto the mount with a drop of threadlocker on each screw.

Which red dots will fit?

It depends on the mount you choose. For the Tanfoglio Domina we have mounts for the Trijicon RMR footprint. Find the footprint of your red dot in its specifications and take the mount that names it.