New EGW red dot mounts for 1911 and revolvers

We now have four new red dot mounts from EGW in stock. Two are for 1911 pistols: one for the Kimber Fixed cut and one for the LPA cut. The other two are for revolvers: Ruger and Smith & Wesson. Each mount replaces the rear sight. No slide milling and no permanent changes are needed. All four are machined from aluminium in the USA by EGW.

On a 1911, the rear sight cut decides

The mount goes into the rear sight dovetail of the slide. 1911 slides come with different dovetail cuts, and each cut needs its own mount. The model name is not always enough to tell which cut you have, so check the shape of the cut itself. Our guide to 1911 dovetail cuts shows how to recognize them.

The LPA cut and the BoMar cut look almost the same. Look at the elevation screw of your rear sight. If it sits directly above the dovetail, it is an LPA cut. If it sits slightly behind the dovetail, it is a BoMar cut.

Both new 1911 mounts take red dots with Trijicon RMR footprint. Footprint is the pattern of screw holes and pins on the bottom of the red dot. The mount has to match it. For red dots with Shield RMSc, Leupold DPP or Holosun K-series footprint, there are type S mounts for the same cuts in the collections for the Kimber Fixed cut and the LPA cut.

EGW red dot mount for 1911 with Kimber Fixed cut, Trijicon RMR footprint
  • Fits: 1911 pistols with Kimber Fixed cut.
  • Takes: red dots with Trijicon RMR footprint.
  • Mounting: replaces the rear sight in the dovetail.
  • Good to know: on some 1911s, the mount may need a minor modification.
EGW red dot mount for 1911 with LPA cut, Trijicon RMR footprint
  • Fits: 1911 pistols with LPA cut, for example Springfield Range Officer, STI Trojan or Rock Island Pro Match Ultra. The full list is on the product page.
  • Takes: red dots with Trijicon RMR footprint.
  • Mounting: replaces the rear sight in the dovetail.
  • Good to know: on some 1911s, the mount may need a minor modification.

Ruger and Smith & Wesson revolvers: both footprint types now covered

On a revolver, the mount also replaces the rear sight. With the two new mounts, you can now choose the footprint for both brands:

EGW red dot mount for Ruger revolvers, Trijicon RMR footprint
  • Fits: Ruger Blackhawk, Super Blackhawk, Super Wrangler, Redhawk, GP100 with adjustable sights and GP100 Match Champion.
  • Takes: red dots with Trijicon RMR footprint.
  • Mounting: replaces the rear sight. No permanent changes to the revolver.
EGW red dot mount for Smith & Wesson revolvers, Shield RMSc and Leupold DPP footprint
  • Fits: Smith & Wesson revolvers with K, L, N and X frames, for example 19, 66, 586, 686, 629, 460 or 500. The full list is on the product page.
  • Takes: red dots with Shield RMSc or Leupold DPP footprint.
  • Condition: the frame must be drilled and tapped for the S&W scope mount. All new frames are.

Another cut or frame?

The two 1911 mounts fit only the Kimber Fixed cut and the LPA cut. For other 1911 cuts, see the mounts for the Novak cut, the BoMar cut and the G.I. cut.

Ruger GP100: only the version with adjustable sights is on the list of the new mount.

Not sure which cut or frame your pistol or revolver has? Send us a photo of the rear sight area and we will tell you which mount fits.

Search by model